다른 프로그램과 메모리 공유 - 메모리 맵 파일.

 

	개요
	다른 프로그램(프로세스)들이 동일한 메모리를 고유하는 "메모리맵파일(=공유메모리)" 활용법 정리. 요점. 1. ::CreateFileMapping 으로 공유메모리 생성. ::OpenFileMapping 으로 이미 생성된 공유메모리 열기. 2. ::MapViewOfFile 로 상기1의 공유메모리 포인터 받아서 데이터 읽기,쓰기. CreateFileMapping Creates or opens a named or unnamed file mapping object for a specified file. To specify the NUMA node for the physical memory, see CreateFileMappingNuma. Syntax C++ Copy HANDLE WINAPI CreateFileMapping( _In_     HANDLE                hFile, _In_opt_ LPSECURITY_ATTRIBUTES lpAttributes, _In_     DWORD                 flProtect, _In_     DWORD                 dwMaximumSizeHigh, _In_     DWORD                 dwMaximumSizeLow, _In_opt_ LPCTSTR               lpName ); Parameters hFile [in] A handle to the file from which to create a file mapping object. The file must be opened with access rights that are compatible with the protection flags that the flProtect parameter specifies. It is not required, but it is recommended that files you intend to map be opened for exclusive access. For more information, see File Security and Access Rights. If hFile is INVALID_HANDLE_VALUE, the calling process must also specify a size for the file mapping object in the dwMaximumSizeHigh and dwMaximumSizeLow parameters. In this scenario, CreateFileMapping creates a file mapping object of a specified size that is backed by the system paging file instead of by a file in the file system. lpAttributes [in, optional] A pointer to a SECURITY_ATTRIBUTES structure that determines whether a returned handle can be inherited by child processes. The lpSecurityDescriptor member of the SECURITY_ATTRIBUTES structure specifies a security descriptor for a new file mapping object. If lpAttributes is NULL, the handle cannot be inherited and the file mapping object gets a default security descriptor. The access control lists (ACL) in the default security descriptor for a file mapping object come from the primary or impersonation token of the creator. For more information, see File Mapping Security and Access Rights. flProtect [in] Specifies the page protection of the file mapping object. All mapped views of the object must be compatible with this protection. This parameter can be one of the following values. Value Meaning PAGE_EXECUTE_READ 0x20 Allows views to be mapped for read-only, copy-on-write, or execute access. The file handle specified by the hFile parameter must be created with the GENERIC_READ and GENERIC_EXECUTE access rights. Windows Server 2003 and Windows XP:  This value is not available until Windows XP with SP2 and Windows Server 2003 with SP1. PAGE_EXECUTE_READWRITE 0x40 Allows views to be mapped for read-only, copy-on-write, read/write, or execute access. The file handle that the hFile parameter specifies must be created with the GENERIC_READ, GENERIC_WRITE, and GENERIC_EXECUTE access rights. Windows Server 2003 and Windows XP:  This value is not available until Windows XP with SP2 and Windows Server 2003 with SP1. PAGE_EXECUTE_WRITECOPY 0x80 Allows views to be mapped for read-only, copy-on-write, or execute access. This value is equivalent to PAGE_EXECUTE_READ. The file handle that the hFile parameter specifies must be created with the GENERIC_READ and GENERIC_EXECUTE access rights. Windows Vista:  This value is not available until Windows Vista with SP1. Windows Server 2003 and Windows XP:  This value is not supported. PAGE_READONLY 0x02 Allows views to be mapped for read-only or copy-on-write access. An attempt to write to a specific region results in an access violation. The file handle that the hFile parameter specifies must be created with the GENERIC_READ access right. PAGE_READWRITE 0x04 Allows views to be mapped for read-only, copy-on-write, or read/write access. The file handle that the hFile parameter specifies must be created with the GENERIC_READ and GENERIC_WRITE access rights. PAGE_WRITECOPY 0x08 Allows views to be mapped for read-only or copy-on-write access. This value is equivalent to PAGE_READONLY. The file handle that the hFile parameter specifies must be created with the GENERIC_READ access right. An application can specify one or more of the following attributes for the file mapping object by combining them with one of the preceding page protection values. Value Meaning SEC_COMMIT 0x8000000 If the file mapping object is backed by the operating system paging file (the hfile parameter is INVALID_HANDLE_VALUE), specifies that when a view of the file is mapped into a process address space, the entire range of pages is committed rather than reserved. The system must have enough committable pages to hold the entire mapping. Otherwise, CreateFileMapping fails. This attribute has no effect for file mapping objects that are backed by executable image files or data files (the hfile parameter is a handle to a file). SEC_COMMIT cannot be combined with SEC_RESERVE. If no attribute is specified, SEC_COMMIT is assumed. SEC_IMAGE 0x1000000 Specifies that the file that the hFile parameter specifies is an executable image file. The SEC_IMAGE attribute must be combined with a page protection value such as PAGE_READONLY. However, this page protection value has no effect on views of the executable image file. Page protection for views of an executable image file is determined by the executable file itself. No other attributes are valid with SEC_IMAGE. SEC_IMAGE_NO_EXECUTE 0x11000000 Specifies that the file that the hFile parameter specifies is an executable image file that will not be executed and the loaded image file will have no forced integrity checks run. Additionally, mapping a view of a file mapping object created with the SEC_IMAGE_NO_EXECUTE attribute will not invoke driver callbacks registered using the PsSetLoadImageNotifyRoutine kernel API. The SEC_IMAGE_NO_EXECUTE attribute must be combined with the PAGE_READONLY page protection value. No other attributes are valid with SEC_IMAGE_NO_EXECUTE. Windows Server 2008 R2, Windows 7, Windows Server 2008, Windows Vista, Windows Server 2003, and Windows XP:  This value is not supported before Windows Server 2012 and Windows 8. SEC_LARGE_PAGES 0x80000000 Enables large pages to be used for file mapping objects that are backed by the operating system paging file (the hfile parameter is INVALID_HANDLE_VALUE). This attribute is not supported for file mapping objects that are backed by executable image files or data files (the hFile parameter is a handle to an executable image or data file). The maximum size of the file mapping object must be a multiple of the minimum size of a large page returned by the GetLargePageMinimum function. If it is not, CreateFileMapping fails. When mapping a view of a file mapping object created with SEC_LARGE_PAGES, the base address and view size must also be multiples of the minimum large page size. SEC_LARGE_PAGES requires the SeLockMemoryPrivilege privilege to be enabled in the caller's token. If SEC_LARGE_PAGES is specified, SEC_COMMIT must also be specified. Windows Server 2003:  This value is not supported until Windows Server 2003 with SP1. Windows XP:  This value is not supported. SEC_NOCACHE 0x10000000 Sets all pages to be non-cachable. Applications should not use this attribute except when explicitly required for a device. Using the interlocked functions with memory that is mapped with SEC_NOCACHE can result in an EXCEPTION_ILLEGAL_INSTRUCTION exception. SEC_NOCACHE requires either the SEC_RESERVE or SEC_COMMIT attribute to be set. SEC_RESERVE 0x4000000 If the file mapping object is backed by the operating system paging file (the hfile parameter is INVALID_HANDLE_VALUE), specifies that when a view of the file is mapped into a process address space, the entire range of pages is reserved for later use by the process rather than committed. Reserved pages can be committed in subsequent calls to the VirtualAlloc function. After the pages are committed, they cannot be freed or decommitted with the VirtualFree function. This attribute has no effect for file mapping objects that are backed by executable image files or data files (the hfile parameter is a handle to a file). SEC_RESERVE cannot be combined with SEC_COMMIT. SEC_WRITECOMBINE 0x40000000 Sets all pages to be write-combined. Applications should not use this attribute except when explicitly required for a device. Using the interlocked functions with memory that is mapped with SEC_WRITECOMBINE can result in an EXCEPTION_ILLEGAL_INSTRUCTION exception. SEC_WRITECOMBINE requires either the SEC_RESERVE or SEC_COMMIT attribute to be set. Windows Server 2003 and Windows XP:  This flag is not supported until Windows Vista. dwMaximumSizeHigh [in] The high-order DWORD of the maximum size of the file mapping object. dwMaximumSizeLow [in] The low-order DWORD of the maximum size of the file mapping object. If this parameter and dwMaximumSizeHigh are 0 (zero), the maximum size of the file mapping object is equal to the current size of the file that hFile identifies. An attempt to map a file with a length of 0 (zero) fails with an error code of ERROR_FILE_INVALID. Applications should test for files with a length of 0 (zero) and reject those files. lpName [in, optional] The name of the file mapping object. If this parameter matches the name of an existing mapping object, the function requests access to the object with the protection that flProtect specifies. If this parameter is NULL, the file mapping object is created without a name. If lpName matches the name of an existing event, semaphore, mutex, waitable timer, or job object, the function fails, and the GetLastError function returns ERROR_INVALID_HANDLE. This occurs because these objects share the same namespace. The name can have a "Global\" or "Local\" prefix to explicitly create the object in the global or session namespace. The remainder of the name can contain any character except the backslash character (\). Creating a file mapping object in the global namespace from a session other than session zero requires the SeCreateGlobalPrivilege privilege. For more information, see Kernel Object Namespaces. Fast user switching is implemented by using Terminal Services sessions. The first user to log on uses session 0 (zero), the next user to log on uses session 1 (one), and so on. Kernel object names must follow the guidelines that are outlined for Terminal Services so that applications can support multiple users. Return value If the function succeeds, the return value is a handle to the newly created file mapping object. If the object exists before the function call, the function returns a handle to the existing object (with its current size, not the specified size), and GetLastError returns ERROR_ALREADY_EXISTS. If the function fails, the return value is NULL. To get extended error information, call GetLastError. Remarks After a file mapping object is created, the size of the file must not exceed the size of the file mapping object; if it does, not all of the file contents are available for sharing. If an application specifies a size for the file mapping object that is larger than the size of the actual named file on disk and if the page protection allows write access (that is, the flProtect parameter specifies PAGE_READWRITE or PAGE_EXECUTE_READWRITE), then the file on disk is increased to match the specified size of the file mapping object. If the file is extended, the contents of the file between the old end of the file and the new end of the file are not guaranteed to be zero; the behavior is defined by the file system. If the file on disk cannot be increased, CreateFileMapping fails and GetLastError returns ERROR_DISK_FULL. The initial contents of the pages in a file mapping object backed by the operating system paging file are 0 (zero). The handle that CreateFileMapping returns has full access to a new file mapping object, and can be used with any function that requires a handle to a file mapping object. Multiple processes can share a view of the same file by either using a single shared file mapping object or creating separate file mapping objects backed by the same file. A single file mapping object can be shared by multiple processes through inheriting the handle at process creation, duplicating the handle, or opening the file mapping object by name. For more information, see the CreateProcess, DuplicateHandle and OpenFileMapping functions. Creating a file mapping object does not actually map the view into a process address space. The MapViewOfFile and MapViewOfFileEx functions map a view of a file into a process address space. With one important exception, file views derived from any file mapping object that is backed by the same file are coherent or identical at a specific time. Coherency is guaranteed for views within a process and for views that are mapped by different processes. The exception is related to remote files. Although CreateFileMapping works with remote files, it does not keep them coherent. For example, if two computers both map a file as writable, and both change the same page, each computer only sees its own writes to the page. When the data gets updated on the disk, it is not merged. A mapped file and a file that is accessed by using the input and output (I/O) functions (ReadFile and WriteFile) are not necessarily coherent. Mapped views of a file mapping object maintain internal references to the object, and a file mapping object does not close until all references to it are released. Therefore, to fully close a file mapping object, an application must unmap all mapped views of the file mapping object by calling UnmapViewOfFile and close the file mapping object handle by calling CloseHandle. These functions can be called in any order. When modifying a file through a mapped view, the last modification timestamp may not be updated automatically. If required, the caller should use SetFileTime to set the timestamp. Creating a file mapping object in the global namespace from a session other than session zero requires the SeCreateGlobalPrivilege privilege. Note that this privilege check is limited to the creation of file mapping objects and does not apply to opening existing ones. For example, if a service or the system creates a file mapping object in the global namespace, any process running in any session can access that file mapping object provided that the caller has the required access rights. Windows XP:  The requirement described in the previous paragraph was introduced with Windows Server 2003 and Windows XP with SP2 Use structured exception handling to protect any code that writes to or reads from a file view. For more information, see Reading and Writing From a File View. To have a mapping with executable permissions, an application must call CreateFileMapping with either PAGE_EXECUTE_READWRITE or PAGE_EXECUTE_READ, and then call MapViewOfFile with FILE_MAP_EXECUTE | FILE_MAP_WRITE or FILE_MAP_EXECUTE | FILE_MAP_READ. In Windows Server 2012, this function is supported by the following technologies. Technology Supported Server Message Block (SMB) 3.0 protocol Yes SMB 3.0 Transparent Failover (TFO) Yes SMB 3.0 with Scale-out File Shares (SO) Yes Cluster Shared Volume File System (CsvFS) Yes Resilient File System (ReFS) Yes Examples For an example, see Creating Named Shared Memory or Creating a File Mapping Using Large Pages. Requirements Minimum supported client Windows XP [desktop apps only] Minimum supported server Windows Server 2003 [desktop apps only] Header WinBase.h (include Windows.h) Library Kernel32.lib DLL Kernel32.dll Unicode and ANSI names CreateFileMappingW (Unicode) and CreateFileMappingA (ANSI) See also Memory Management Functions CloseHandle CreateFileMappingNuma Creating a File Mapping Object DuplicateHandle File Mapping Functions MapViewOfFile MapViewOfFileEx OpenFileMapping ReadFile SECURITY_ATTRIBUTES UnmapViewOfFile VirtualAlloc WriteFile from : MSDN MapViewOfFile Maps a view of a file mapping into the address space of a calling process. To specify a suggested base address for the view, use the MapViewOfFileEx function. However, this practice is not recommended. Syntax C++ Copy LPVOID WINAPI MapViewOfFile( _In_ HANDLE hFileMappingObject, _In_ DWORD  dwDesiredAccess, _In_ DWORD  dwFileOffsetHigh, _In_ DWORD  dwFileOffsetLow, _In_ SIZE_T dwNumberOfBytesToMap ); Parameters hFileMappingObject [in] A handle to a file mapping object. The CreateFileMapping and OpenFileMapping functions return this handle. dwDesiredAccess [in] The type of access to a file mapping object, which determines the protection of the pages. This parameter can be one of the following values. Value Meaning FILE_MAP_ALL_ACCESS A read/write view of the file is mapped. The file mapping object must have been created with PAGE_READWRITE or PAGE_EXECUTE_READWRITE protection. When used with the MapViewOfFile function, FILE_MAP_ALL_ACCESS is equivalent to FILE_MAP_WRITE. FILE_MAP_COPY A copy-on-write view of the file is mapped. The file mapping object must have been created with PAGE_READONLY, PAGE_READ_EXECUTE, PAGE_WRITECOPY, PAGE_EXECUTE_WRITECOPY, PAGE_READWRITE, or PAGE_EXECUTE_READWRITE protection. When a process writes to a copy-on-write page, the system copies the original page to a new page that is private to the process. The new page is backed by the paging file. The protection of the new page changes from copy-on-write to read/write. When copy-on-write access is specified, the system and process commit charge taken is for the entire view because the calling process can potentially write to every page in the view, making all pages private. The contents of the new page are never written back to the original file and are lost when the view is unmapped. FILE_MAP_READ A read-only view of the file is mapped. An attempt to write to the file view results in an access violation. The file mapping object must have been created with PAGE_READONLY, PAGE_READWRITE, PAGE_EXECUTE_READ, or PAGE_EXECUTE_READWRITE protection. FILE_MAP_WRITE A read/write view of the file is mapped. The file mapping object must have been created with PAGE_READWRITE or PAGE_EXECUTE_READWRITE protection. When used with MapViewOfFile, (FILE_MAP_WRITE | FILE_MAP_READ) and FILE_MAP_ALL_ACCESS are equivalent to FILE_MAP_WRITE. Each of the preceding values can be combined with the following value. Value Meaning FILE_MAP_EXECUTE An executable view of the file is mapped (mapped memory can be run as code). The file mapping object must have been created with PAGE_EXECUTE_READ, PAGE_EXECUTE_WRITECOPY, or PAGE_EXECUTE_READWRITE protection. Windows Server 2003 and Windows XP:  This value is available starting with Windows XP with SP2 and Windows Server 2003 with SP1. For file mapping objects created with the SEC_IMAGE attribute, the dwDesiredAccess parameter has no effect and should be set to any valid value such as FILE_MAP_READ. For more information about access to file mapping objects, see File Mapping Security and Access Rights. dwFileOffsetHigh [in] A high-order DWORD of the file offset where the view begins. dwFileOffsetLow [in] A low-order DWORD of the file offset where the view is to begin. The combination of the high and low offsets must specify an offset within the file mapping. They must also match the memory allocation granularity of the system. That is, the offset must be a multiple of the allocation granularity. To obtain the memory allocation granularity of the system, use the GetSystemInfo function, which fills in the members of a SYSTEM_INFO structure. dwNumberOfBytesToMap [in] The number of bytes of a file mapping to map to the view. All bytes must be within the maximum size specified by CreateFileMapping. If this parameter is 0 (zero), the mapping extends from the specified offset to the end of the file mapping. Return value If the function succeeds, the return value is the starting address of the mapped view. If the function fails, the return value is NULL. To get extended error information, call GetLastError. Remarks Mapping a file makes the specified portion of a file visible in the address space of the calling process. For files that are larger than the address space, you can only map a small portion of the file data at one time. When the first view is complete, you can unmap it and map a new view. To obtain the size of a view, use the VirtualQuery function. Multiple views of a file (or a file mapping object and its mapped file) are coherent if they contain identical data at a specified time. This occurs if the file views are derived from any file mapping object that is backed by the same file. A process can duplicate a file mapping object handle into another process by using the DuplicateHandle function, or another process can open a file mapping object by name by using the OpenFileMapping function. With one important exception, file views derived from any file mapping object that is backed by the same file are coherent or identical at a specific time. Coherency is guaranteed for views within a process and for views that are mapped by different processes. The exception is related to remote files. Although MapViewOfFile works with remote files, it does not keep them coherent. For example, if two computers both map a file as writable, and both change the same page, each computer only sees its own writes to the page. When the data gets updated on the disk, it is not merged. A mapped view of a file is not guaranteed to be coherent with a file that is being accessed by the ReadFile or WriteFile function. Do not store pointers in the memory mapped file; store offsets from the base of the file mapping so that the mapping can be used at any address. To guard against EXCEPTION_IN_PAGE_ERROR exceptions, use structured exception handling to protect any code that writes to or reads from a memory mapped view of a file other than the page file. For more information, see Reading and Writing From a File View. When modifying a file through a mapped view, the last modification timestamp may not be updated automatically. If required, the caller should use SetFileTime to set the timestamp. If a file mapping object is backed by the paging file (CreateFileMapping is called with the hFile parameter set to INVALID_HANDLE_VALUE), the paging file must be large enough to hold the entire mapping. If it is not, MapViewOfFile fails. The initial contents of the pages in a file mapping object backed by the paging file are 0 (zero). When a file mapping object that is backed by the paging file is created, the caller can specify whether MapViewOfFile should reserve and commit pages at the same time (SEC_COMMIT) or simply reserve pages (SEC_RESERVE). Mapping the file makes the entire mapped virtual address range unavailable to other allocations in the process. After a page from the reserved range is committed, it cannot be freed or decommitted by calling VirtualFree. Reserved and committed pages are released when the view is unmapped and the file mapping object is closed. For details, see the UnmapViewOfFile and CloseHandle functions. To have a file with executable permissions, an application must call CreateFileMapping with either PAGE_EXECUTE_READWRITE or PAGE_EXECUTE_READ, and then call MapViewOfFile with FILE_MAP_EXECUTE | FILE_MAP_WRITE or FILE_MAP_EXECUTE | FILE_MAP_READ. In Windows Server 2012, this function is supported by the following technologies. Technology Supported Server Message Block (SMB) 3.0 protocol Yes SMB 3.0 Transparent Failover (TFO) Yes SMB 3.0 with Scale-out File Shares (SO) Yes Cluster Shared Volume File System (CsvFS) Yes Resilient File System (ReFS) Yes When CsvFs is paused this call might fail with an error indicating that there is a lock conflict. Examples For an example, see Creating Named Shared Memory. Requirements Minimum supported client Windows XP [desktop apps only] Minimum supported server Windows Server 2003 [desktop apps only] Header WinBase.h (include Windows.h) Library Kernel32.lib DLL

  

	코드구현예
	상황. 프로그램A에서 메모리맵파일을 생성하고 float형 데이터 기록하고, 프로그램B에서는 A에서 생성한 메모리맵파일에 접근하여 데이터를 읽는다. 프로그램A 1. 메모리맵파일 생성. 함수 CreateFileMapping 2. 1에서 생성된 메모리 포인터 받기. 함수 MapViewOfFile, 함수인자로 FILE_MAP_WRITE 로 하여 쓰기 모드로 설정. 프로그램B 3. 1에서 생성된 메모리맵파일 오픈하기. 함수 OpenFileMapping. 4. 3에서 오픈된것의 포인터 받기. 함수 MapViewOfFile. 함수인자로 FILE_MAP_READ 로 하여 읽기모드로 설정. 아래 프로그램A에서는 float 형 최대 512개를 저장하기위한 메모리맵파일을 생성하고 데이터를 저장하는 것을 보이고 있다. 코드에서 붉은색 문자열은 프로그램A,B에서 일치되어야 한다. 프로그램A   프로그램B .h에서 HANDLE hMapFile; float* pMapView; .cpp 에서 ///공유메모리 생성. hMapFile = ::CreateFileMapping((HANDLE)0xFFFFFFFF,NULL,PAGE_READWRITE,0,sizeof(float)*512,"Share_MyMemory"); /// 공유메모리 포인터받기. pMapView = (float*)MapViewOfFile(hMapFile, FILE_MAP_WRITE,0,0,0); /// 공유메모리에 데이터기록. for(int i=0;i<512;i++) {  pMapView[i] = 123.f; } .h에서 HANDLE hMapFile; float* pMapView; .cpp 에서 /// 공유메모리 열기. hMapFile = ::OpenFileMapping(FILE_MAP_READ,FALSE,"Share_MyMemory"); /// 공유메모리 포인터 얻기. pMapView = (float*)MapViewOfFile(hMapFile,FILE_MAP_READ,0,0,0); /// 공유메모리에 기록된 데이터 활용. for(int i=0;i<512;i++) {  my_temp = pMapView[i]; }

 

 

본 글이 포함된 상위 정리 장소.  Visual Studio/VC++/C/C# 활용정리 -> http://igotit.tistory.com/11

 

///320.