- 실리콘 랩의 MCU EFM8, EFM32 등에 펌웨어 기록하는 수단 전체 정보 정리글. 아래 제조사 링크에서 제공됨.
- 실리콘 랩은 링크주소를 시도때도없이 변경해대서 링크만 기록해서는 나중에 주요 정보 접근이 안되므로 아래 통째로 복사해옴.
위 주소 페이지 복사해옴.
For a complete guide to production programming, please view Application Note 136.
In-system programming involves programming the device after it has been installed in the end system. For this method access to the debug pins is made available so that the device can be programmed. The pins vary depending on the debug interface and device.
Pins needed and associated documentation:
C2 — C2CK, C2D, and GND:
Joint Test Action Group (JTAG) — TCK, TMS, TDI, TDO and GND:
Serial Wire Debug (SWD) — SWDIO and SWCLK:
- AN0062: Programming Internal Flash Over the Serial Wire Debug Interface
- AN1011: Standalone Programmer via the SWD Interface
Once the correct pins are routed, there are a number of tools offered to program the device.
Flash Programmer: A tool that allows the user to flash the device with a binary or hex file. Available within Simplicity Studio that supports EFM8/32, C8051, EFR32, and EZR32.
Simplicity Commander: A tool that contains a scriptable command line, allows the user to flash their application, and create production ready binaries, for more information see UG162: Simplicity Commander Reference.
Jlink Python Programming GUI Tool: A Python 2.7 based GUI tool that uses the Segger JLinkARM.dll to program EFM8 and EFM32 devices via Segger JLink over the C2 or SWD interface.
Flash Programming Utilities: A GUI-based or command line C8051 programmer that allows the user to download code to a device and perform other memory operations without needing to use the IDE. Found here. For more information see AN117
Production Programmer: A standalone tool similar to the flash programmer and Simplicity Commander but targeted more for rapid production programming of many devices. For more information see the MCU Software pages.
Having devices pre-programmed is the easiest option for production programming. No design considerations need to be made and the device can be quickly installed into the final system. However, it is the least adaptable option and therefore is not well suited for rapidly-changing programs. For this option a binary or hex file must be provided.
Silicon Labs offers pre-programmed devices, contact your local sales representative for more information.
Many Silicon Labs distributors and other entities offer pre-programmed devices. For a list, see the table in the community.
This option involves programming the uninitialized and uninstalled device, in-house. In order to program the device custom-made or third-party hardware is used.
For custom hardware, the information in the following application notes can be used to design and build a custom programmer.
- AN0062 Programming Internal Flash Over the Serial Wire Debug Interface
- AN1011 Standalone Programmer via the SWD Interface
Many third-party programmers support Silicon Labs’ products. They vary in speed, price, and the number of devices programmed at once. For a list of commonly used programmers visit the community.
첫 등록 : 2021.07.20
최종 수정 :
단축 주소 : https://igotit.tistory.com/2898
'임베디드.일렉트로닉스 > EFM8' 카테고리의 다른 글
|SILabs. MCU Production Programmer . 8bit MCU. EFM8 (0)||2021.07.20|
|SILabs. MCU 플래시 프로그래밍 수단 . EFM8 EFM32 (0)||2021.07.20|
|STM32. nRF52. ESP32. EFM8. EFM32. PSoC 활용 정리. (9)||2019.10.24|
|EFM8 UB1, USB 설정하기. (0)||2019.09.04|
|Simplicity Studio에서 EFM8 프로젝트 만들기. (0)||2019.09.04|
|EFM32,EFM8, C8051F 개발 IDE Simplicity Studio (0)||2019.09.04|