본문 바로가기
임베디드.일렉트로닉스/STM32

ST-LINK V2.-STM32, STM8 Debugging and Programming Tool.

by 리치굿맨 2019. 9. 8.

 

 

 

구입처 

 

ARM용개발장비 ST - Link/V2

COUPANG

www.coupang.com

 

제조사 제공정보 : http://www.st.com/web/catalog/tools/FM146/CL1984/SC1046/SS1680/PF251168

 

사용자 설명서 : http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00026748.pdf

 

ST-LINK/V2 USB driver for Windows 7, Vista and XP -> http://www.st.com/web/en/catalog/tools/PF258167

 

ST-LINK/V2 내장 MCU 펌웨어 업데이트 방법. -> http://igotit.tistory.com/817

 

ST-LINK/V2 이용하여 타겟MCU 기록전용 유틸리 S/W -> http://igotit.tistory.com/901

 

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

In addition to providing the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 2500 VRMS.

STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software.

STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.

 

Key Features

  • 5 V power supplied by a USB connector
  • USB 2.0 full speed compatible interface
  • USB standard A to mini B cable
  • Direct firmware update feature supported (DFU)
  • Status LED which blinks during communication with the PC
  • Operating temperature 0 to 50 °C

SWIM specific features

  • 1.65 V to 5.5 V application voltage supported on SWIM interface
  • SWIM low-speed and high-speed modes supported
  • SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
  • SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
  • SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector

JTAG/serial wire debugging (SWD) specific features

  • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
  • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
  • JTAG supported
  • SWD and serial wire viewer (SWV) communication supported

 

 

 

 

 

 

연관 

 

 

 

 

KEIL MDK-ARM. Logic Analyzer Window

Logic Analyzer Window KEIL MDK-ARM 의 Debug 모드에서 Logic analyzer Windows 로 펌웨어의 변수들의 값을 파형으로 보기. 개요 설명사이트 : http://www.keil.com/support/man/docs/ulink2/ulink2_trace_la_wi..

igotit.tistory.com

 

 

ST-LINK V2. firmware update.

ST-LINK/V2 펌웨어 업데이트 ST-LINK V2 내장된 MCU 의 펌웨어 업데이트 위한 2가지의 소프트웨어 경로가 가능하다. 방법1 을 이용하는 것이 더 유용하다. 방법1. STM32 ST-LINK Utility S/W 를 이용하는 방법. -..

igotit.tistory.com

 

 

 

ST-LINK V2. KEIL Trace: No Synchronization 오류 해결방법.

오류증상. KEIL 의 Debug모드에서 아래 그림 처럼 오류 발생. 해결책. ST-LINK V2 firmware update 한다. -> http://igotit.tistory.com/817 ///818.

igotit.tistory.com

 

 

KEIL MDK-ARM. Debug (printf) Viewer 에서 printf 출력결과 보기.

개요 KEIL MDK-ARM 으로 작성된 펌에어코드상의 printf 구문의 출력값을 KEIL MDK-ARM Debug (prontf) Viewer 창에서 보기 위한 설정법. 설정법 설명 사이트 : http://www.keil.com/support/man/docs/ulink2/ulin..

igotit.tistory.com

 

 

댓글0


   
현물 |선물 인버스 |선물 USDT     현물 | 선물 USDT |봇제작툴/카피트레이딩     현물 |선물 인버스 |선물 USDT     선물 인버스 |선물 USDT